The Aerodrome Forum - View Single Post - DR-1 (Sands): Builders Group

Fokker210 · 19 August 2004, 08:47 PM

Here is another item I found very helpful !
If you are like me and don't own a professional grade, monster table saw ( I have a normal, human size saw ) "Board Buddies" are great.

Check out this link !

http://www.grizzly.com/products/item...emnumber=G2370

I cut down a 2 X 4, attached these to the top of it and clamp it all to my table saw fence. This keeps the material tight up against the fence at all times and the wheels only roll one direction, preventing kickbacks.

19 August 2004, 08:47 PM	#33 (permalink)
Fokker210 Scout Pilot Contributor Join Date: Jul 2004 Location: Georgia Posts: 306	Here is another item I found very helpful ! If you are like me and don't own a professional grade, monster table saw ( I have a normal, human size saw ) "Board Buddies" are great. Check out this link ! http://www.grizzly.com/products/item...emnumber=G2370 I cut down a 2 X 4, attached these to the top of it and clamp it all to my table saw fence. This keeps the material tight up against the fence at all times and the wheels only roll one direction, preventing kickbacks.