|
Romani; I can see why your having so much trouble. Forgive me but your worrying too much about the process. For instance.
The wing and control surface. Make your cuts before you do anything to the wing then sand off the factory molded seams. You don't have to separte the aileron , rudder or elevator to reposition it. Scribe light lines in both the top surface and the bottom. Once done ( even with predrilled rigging holes) then paint and decal. When thoroughly dry spray your chosen flat or gloss finish and again when dry, apply slight pressure to the scribed lines slightly bending the surface in the desired direction. No worries. Then attach to the model. You may want to put the smallest amount of liquid cyano (super glue) in the biggest gap of the slice just for strength.
JohnReid; I think that there's room for both if its readily identifiable to the reader. Hence the larger font size for the topic.
|