|
the Jenny build cont.
Fig3-4 completed fuselage side. For sealing the wood I use laquer.A 2/3 laquer-1/3 laquer thinner mix.It can be sprayed on the finished assembly or brushed on the individual pieces before assembly.I built up my fuselage side directly on a building board covered with a piece of foam insulation.I taped the plan to the insulation and then placed wax paper over it(so the glue will not stick to the plan)I then pinned down the longerons and struts over the waxpaper.There are no changes here other than at station #1 where there is no 15 degree slant for the downthrust engine.The 6inch change in wing stagger does not change the positioning of the struts as far as I can see.to be cont...
|