I used aluminium one sided sticky foil to make up the end fittings for the kingposts.I drilled a hole in the top and made up a double ended eyebolt for the braces.Then I drilled a hole in the bottom to pin it to the spar.Dont install them finally until all the wing fittings have been installed as they will surely get brok
en off .
I assembled the aileron control sheaves and used a brass rod u-bolts to fasten them to the spars( See fig 1-16)Because the Canuck has double ailerons the positioning of these sheaves are different than the JN4D.I will take pics of this arrangement when the wings are finally installed. to be cont...
