The Aerodrome Forum - View Single Post

Jeff Brooks · 15 March 2006, 04:03 PM

I made the axle boxes using a jig I got from Franzkait off the Sands Building site, post #1076.

here is what it look like before crunching them out. it is tricky using 4130 ...

and I pressed them at work using a mechanical press ...

and after pressing it ...

15 March 2006, 04:03 PM	#4 (permalink)
Jeff Brooks Forum Ace Join Date: Dec 2004 Location: Rochester, NY Posts: 1,194	More landing gear parts ... I made the axle boxes using a jig I got from Franzkait off the Sands Building site, post #1076. here is what it look like before crunching them out. it is tricky using 4130 ... and I pressed them at work using a mechanical press ... and after pressing it ... __________________ Jeff Brooks