Quote:
Originally Posted by Jeff Brooks
Hi all,
Pavel has sent me pictures of his wheel spindles. here he has the bronze bushings in. I think they look rather nice! they are set up to take a brake disk. Pavel, you shoul pop in and tell us what parts are gonna go together.
Here is a great shot of the top with the bushings and spoke holes.
Here is the bottom.
 |
The hub is from three parts, centre shaft and side flanges, welded and drill. The hub on one side take a disc brake 8 inch dia. The disc is carry with 5 1/4 inch bolts, on picture just pre drill with 3/16 ready for final assembly. In centre of shaft is grease fitting, bronze bushings are press in. Bushings for brake are welded as well. Going used a spokes 0.180 seze SS material.
Pavel