The Aerodrome Forum - View Single Post - Roden 1/32 SE5a -the build

Kofoed · 18 April 2008, 05:11 AM

Hi Stephen,

Looks so great, thanks for posting all these photo's. And thanks a lot for your thorough descriptions on potential problems. This is certainly a great reference.

I was lucky to get my hands in a copy of Grinell-Milne's book, "Wind in the Wires" (excellent reading, by the way). In this book is quite a good photograph of his "Schweinhund". If you have seen this, would you agree that this was PC10? The reds and blues tell me that this shot was taken on orthocromatic film, so the fuselage should have been much darker had it been red, shouldn't it? Is this the scheme your will show on yours?

Thank you,
Kofoed

18 April 2008, 05:11 AM	#17 (permalink)
Kofoed Two-seater Pilot Join Date: May 2007 Location: Denmark Posts: 199	Excellent Hi Stephen, Looks so great, thanks for posting all these photo's. And thanks a lot for your thorough descriptions on potential problems. This is certainly a great reference. I was lucky to get my hands in a copy of Grinell-Milne's book, "Wind in the Wires" (excellent reading, by the way). In this book is quite a good photograph of his "Schweinhund". If you have seen this, would you agree that this was PC10? The reds and blues tell me that this shot was taken on orthocromatic film, so the fuselage should have been much darker had it been red, shouldn't it? Is this the scheme your will show on yours? Thank you, Kofoed