The Aerodrome Forum - View Single Post

drrivah · 8 May 2008, 04:12 PM

Hi-
Any equipment recommendations for an abrasive and/or soda blaster and compressor set up for use in cleaning up a welded 4130 fuselage prior to epoxy/primer?

I am thinking 6CFM/ 80-120 psi is about right. Too big for a glove box.

Comments on specs and brands from the experts with experience in this area?

Thanks.

-pete/Leesburg, VA

8 May 2008, 04:12 PM	#25 (permalink)
drrivah Two-seater Pilot Join Date: Dec 2005 Location: Virginia Posts: 167	Recommendation for abrasive/soda blasters? Hi- Any equipment recommendations for an abrasive and/or soda blaster and compressor set up for use in cleaning up a welded 4130 fuselage prior to epoxy/primer? I am thinking 6CFM/ 80-120 psi is about right. Too big for a glove box. Comments on specs and brands from the experts with experience in this area? Thanks. -pete/Leesburg, VA