Thank you Bob
Images coming as soon as tomorrow.
There is some doubt here- for me. On one series build sample I have note band type of the central riging and from this band are extending two wires and secured into wings. Extract from manfred plane indicate that there was not band type and only one wire fit to the wing. Images are in attach. Idea or info?
Kit suffer from some mkinnor problems. First is the lack of the lower panel for the engine cowling which is important for the Fi sample of airplane. second I have note is the letter
I in the decal sheet. It is of the same size as the letters
Dr and
Fi and it have to be trimed for proper size.
And finaly- on this kit I will not use at all brown green color at all. I will use sample color show on this digital chip. From what I have read here I noted that all description of the color are based on the very old sample of color and it is well know that during the time color change it look and also tend to yellow and brown. No need to say that there is know sample of color which is in origin ochre and after few decades it turn into the grey. For me personally- brown green is off forever. Green with small hue of brown is what I will use. Hope that my statement would not cause any conflict here.
Cheers
