First action of streaking is over. Now I will going into the one more coat to give more contrast and more precise match in the regards to the available photographs and information they ofer. Some problems are noted if compared with my previously method used for streaking. Maybe craftsmans was not experienced so lines are not full lenght in some cases and look that they are repeat strokes. In this way I was more use small rounded brush then the flat which I have used in previous project. Some later when this cot complete dry I will repeat strokes. I dillutte paint with nitro thinner so this will be very soon and belive that even today I could be able to spray coat of the underside blue.
Some explanation about the whole settings for the painting- I have place all of the parts on one cardboard. On cardboard you could note two strip of self adhesive tape and this is paint protective tape used in the automotive workshops. Then I have placed parts, first top wing, then elevons, mid wingd, lower wing, tail and undercariage box. This give more advantage in visual control of work as well I start from top wings and going down. Only part which is not fixed is fuselge and I hold it with fingers.... don't ask how my nails look like now
Cheers
