|
Hi Miguel,
Great work so far, but if I might give some constructive criticism... the shoulder straps look like they are hanging down to the floor. The Sutton harness as it is called should be pulled back so the ends of the straps with the buckles are on the seat, they all snap to the lap belts at the pilots waist level. So the Y shaped area where the 2 shoulder belts join the 1 strap should be pulled back towards the top of the fuel tank, and the silver mounting wire should be going straight across from 1 side of the fuel tank to the other - this should allow the shoulder belts to be in a more accurate position. If this does not make any sense to you let me know and I'll try to find a photo to illustrate this.
Dave
|