The Aerodrome Forum - View Single Post

davecww1 · 30 June 2008, 04:46 PM

Much thanks. I finally found my Fokker D.VII Anthology vol. 1 so I can get the lozenge on correctly, am starting decaling the upper wing and interior fuselage tonight. I decided to use some of the Roden lozenge that has the red brown too light, I will give it a linen wash when dry to look like it is printed on the opposite side of the fabric. (in 1/48 scale I'm not going to bother with reversing the pattern, just want the idea of lozenge inside the fuselage and don't want to waste my Americal Gryphon stuff for the inside that can be barely seen when finished!)
Dave

30 June 2008, 04:46 PM	#6 (permalink)
davecww1 Forum Ace Join Date: Mar 2002 Location: Enfield CT USA Posts: 1,185	Thanks again Dan! Much thanks. I finally found my Fokker D.VII Anthology vol. 1 so I can get the lozenge on correctly, am starting decaling the upper wing and interior fuselage tonight. I decided to use some of the Roden lozenge that has the red brown too light, I will give it a linen wash when dry to look like it is printed on the opposite side of the fabric. (in 1/48 scale I'm not going to bother with reversing the pattern, just want the idea of lozenge inside the fuselage and don't want to waste my Americal Gryphon stuff for the inside that can be barely seen when finished!) Dave