The Aerodrome Forum - View Single Post

JohnFitz · 18 October 2008, 08:22 AM

Working on the l/g using GTM method with aluminum struts and 3/16' piano wire JB Welded in. I'll add a cross bar once I have the struts in position. I'll be brazing a loop onto the piano wire lower leg which will also serve as the bungee posts before they get JB Welded into the struts.

18 October 2008, 08:22 AM	#27 (permalink)
JohnFitz Forum Ace Join Date: Mar 2002 Posts: 1,180	Aviatik Working on the l/g using GTM method with aluminum struts and 3/16' piano wire JB Welded in. I'll add a cross bar once I have the struts in position. I'll be brazing a loop onto the piano wire lower leg which will also serve as the bungee posts before they get JB Welded into the struts. Last edited by JohnFitz; 19 February 2009 at 07:07 PM.