Quote:
Originally Posted by brinesharks
Nick - if you read this, the small holes through the shaft are for tapered pins.
I might pick your brains on these if I can.
|
Hi Bryan,
Just spotted this, have been off the air for a couple of days as our phone line was out of action.
That's a timely subject as have just finished fitting the taper pins to the counter shaft control and also the control column. The ones on the shaft and at the base of the column all have nuts on the end as would be a bit awkward if one dropped out however the ones that fit the control grip are just press fitted. I'm guessing yours would be the nutted variety.
Cheers, Nick