Hi! And thanks for your words.
And if and there is worse. I cut both reinforcements 1 / 2mm (I do not know any more if the photograph was made before or after operation):.
and sanded there:
After that it's correct ... I added the bar behind the seat (it will be right once glued together by every quoting idem for cables) and a " chest in cloth " which is fixed there:
The chest is alu food type there " box for congelation ":
I forgot to make a photograph inside the Spad.
I glued together a side of the airframe with the cover (the best that I could). I began with the left side which is the most difficult to put, and ... it misses
1 / 2mm in the front and also
1 / 2mm in the back
Then same job with the righthand which comes back almost perfectly. The bottom of the airframe is not reached yet:
