The Aerodrome Forum - View Single Post

huberlu · 27 March 2009, 12:42 AM

Thank you guys!

First try with "metallic scotch tape":

The metallic scotch tape must be sanded to become very fine before being cut. Riveting is made before cutting.

the first plate was destroyed when I wanted to fabricate roundness. I did it again four times, glued together four times and sanded glue four times...

Finally I glued it by using plastic band to fabricate tabs (in black "dymo") as wedge.

I would like to paint wings inferior. She will be an American spad. I read that underside was grey, or without painting nobody seem to know (as always).
I read the article on the 5 French tones:

French 5 Color chips from Methune Handbook

What is about MisterKit paint ??

A+

27 March 2009, 12:42 AM	#40 (permalink)
huberlu Two-seater Pilot Join Date: Jan 2008 Location: Scharrachbergheim Posts: 152	Thank you guys! First try with "metallic scotch tape": The metallic scotch tape must be sanded to become very fine before being cut. Riveting is made before cutting. the first plate was destroyed when I wanted to fabricate roundness. I did it again four times, glued together four times and sanded glue four times... Finally I glued it by using plastic band to fabricate tabs (in black "dymo") as wedge. I would like to paint wings inferior. She will be an American spad. I read that underside was grey, or without painting nobody seem to know (as always). I read the article on the 5 French tones: French 5 Color chips from Methune Handbook What is about MisterKit paint ?? A+ Last edited by huberlu; 27 March 2009 at 12:51 AM.