The Aerodrome Forum - View Single Post

Umlaufmotor · 18 August 2009, 01:33 PM

Here Pictures from the tail skid. I used the kit tail skid and removed the "plasic-tube" on it. You see, the tail skid is to short, i mounted a plastic part with 4,3mm lenght and a metall pin. The pin is 15,5mm long and 0,6mm thick............ .

Servus
Bertl

@Doug Baumann
Hi Doug, i made testprints on a paper with your 4-color-Tarnstoff VERY NICE, i will used that on the Fokker.
Thank's a lot my friend!!!!!!!!

18 August 2009, 01:33 PM	#50 (permalink)
Umlaufmotor Scout Pilot Join Date: Jun 2009 Location: Landsberg/Lech, Germany/Bavaria Posts: 383	Tail-skid Here Pictures from the tail skid. I used the kit tail skid and removed the "plasic-tube" on it. You see, the tail skid is to short, i mounted a plastic part with 4,3mm lenght and a metall pin. The pin is 15,5mm long and 0,6mm thick............ . Servus Bertl @Doug Baumann Hi Doug, i made testprints on a paper with your 4-color-Tarnstoff VERY NICE, i will used that on the Fokker. Thank's a lot my friend!!!!!!!! Last edited by Umlaufmotor; 2 January 2010 at 10:15 AM.