The Aerodrome Forum - View Single Post

Umlaufmotor · 6 October 2009, 02:22 PM

Hi, here comes Pictures from the backpaneel.
I removed the plastic and replaced it with a very thin (0,18mm) Gfk-plate.
You can read the name behind the gfk-plate

The small holes are made with an 0,20mm CNC-Drill.

Servus
Bertl

6 October 2009, 02:22 PM	#17 (permalink)
Umlaufmotor Scout Pilot Join Date: Jun 2009 Location: Landsberg/Lech, Germany/Bavaria Posts: 383	start with the cockpit Hi, here comes Pictures from the backpaneel. I removed the plastic and replaced it with a very thin (0,18mm) Gfk-plate. You can read the name behind the gfk-plate The small holes are made with an 0,20mm CNC-Drill. Servus Bertl Last edited by Umlaufmotor; 2 January 2010 at 10:12 AM.