Quote:
Originally Posted by beeza
Hi Hans
thanks for your kind words.
The decals go on easy as long as the surface is a very high gloss and I used Mr. Mark Setter as a decal setting solution, I presume other brands would do the same job.
The holes in the engine door supports where done using a combination of 0.2mm - 0.3mm and 0.4mm drill bits. It was a little fiddly but with care it can be achieved very easily. For the bracing on the doors I used 0.4mm brass tube.
Hope this answers your question - happy modelling.
Des.
|
Hi Des,
Thanks for your kind answers. Will help a lot when I get that far in my build.
I'm doing a detailed blog for my build. Since I'm new here, I'm not allowed to post links yet, but you may find it by checking my profile
