The above pic is of Ken Foran's center section as it should be done.The center section struts are as they come in the kit.I will be making mine in wood and use the end fittings only.Right now I am planning to put the center section structure on the fuselage.
I know that there is a sort of lack of continuity here as some areas seem over protected and others not at all.I have had to compromise here in order to tell the story but still leave enough of the airplane structure open to be interesting.Actually in real life the whole thing would be shipped in a crate!
Lets just say that the airplane will be crated in Toronto prior to shipment via the CNR to California.
Picture of center section courtesy of Ken Foran.