HOW TO BUILD AIRCRAFT DIORAMAS

[JohnReid]

Until now I usually made my own turnbuckles but this time I will use the leftover ones from the Camel build.
Upon examining them closely they are of a better quality than the ones supplied with the original Albatros kit,harder metal and more accurately cast.The other consideration was that they will hardly be noticeable on a burned wreck at normal viewing distance.When I did the first Albatros that now is in the hangar I wanted to highlight the turnbuckles and even took a little license to make them a little oversize.Why? because kids and most parents today don't have any idea of how these old wings were constructed.The wood aspect is obvious but the wire part with the turnbuckles is less well understood.This diorama is primarily an education tool.
The cast turnbuckles are first cleaned up and then dunked in blackening patina.I will leave the body black but file off some of the patina on the eye bolt part to add a little contrast.They are then dipped in thinned lacquer to seal the metal.
I have always sealed my metal castings just in case they contain any lead.
Brittania metal is not supposed to have any lead in it but some of the original castings seemed a little too soft for my liking.I am not a metallurgist but I didn't want to take a chance of having metal bloom (disintegration) down the road.This has happened to some museum quality ship models in the past because they are in sealed cases and subject to a very polluted atmosphere)
If there is any shine on the metal left by the lacquer I will deal with this using pastels.

[JohnReid]

There is an interesting story in my local paper this morning concerning museums.
Evidently Montreal is hosting a forum of experts from around the world on how to make our museums more interesting places for the general public to visit.
It is an established fact that at the Louvre the average viewer at most spends 25 seconds looking at the Mona Lisa.(they actually have a name for it, "the Mona Lisa effect")Most other works of art get about 3 seconds each.
Whats wrong here? In the words of one expert "A museum must promote emotions ,not product. It must be a place where people can look,think and learn."Modern families want to escape stress and spend more time with each other and engaging the interest of an entire family,youngsters,teens and adults,is no small feat.
Museums must be entertaining and not just entertainment which can be a very fine line.Being entertaining is about engaging,it piques the imagination and challenges us.Entertainment is a diversion,something you do when you are bored.
Another expert says that museums should use their collections to tell multiple stories as another way to connect with the public.
Why did I find this article in the paper so interesting? Because this is what storyboard dioramas are all about.Engaging the individual viewer and the entire family,imagination,education,entertaining,telling stories,challenging .

I know not everyone's goal is to have their stuff in a museum,neither was it mine in the beginning but it just happened that way.Somewhere down the road this will probably happen to a lot of the hobby stuff being produced today.What we are doing now will someday be part of tomorrows heritage , a time when people actually took the time to do things by hand.

[JohnReid]

[JohnReid]

I have glued down the fittings but have left the wires themselves unfinished until just before installation in case they are subject to loosening.Like I thought the turnbuckles are hardly noticeable.

[JohnReid]

Wrong post!

[JohnReid]

[JohnReid]

Fire and smoke damaged engine with a little rust thrown in.
For the first time I tried using blackening patina on the metal.I put it on with an old soft brush and kept applying until I got the degree of darkening I wanted.Then I used a little thinned down raw umber acrylic here and there and finally some black and sienna rust pastels.Any final weathering will be completed upon installation of the engine in the fuselage.

[JohnReid]

[JohnReid]

[JohnReid]