HOW TO BUILD AIRCRAFT DIORAMAS

[JohnReid]

[JohnReid]

[JohnReid]

First look inside the box!
What a disappointment,this is not a museum quality model,not by my standards anyway.It is probably worth about what I paid for it ,about a quarter of what it originally went for a few years ago.I got mine as a closeout special from Model Airways.They will not be re-stocking them in the future,now I think I know why.
This gives the term "museum quality "a bad name.My idea of museum quality would be a 1/10 scale model of the real thing,period.This is not even close.
I still plan to build it using what I can of the stuff provided but it will only be a starting point.The engine ,the spoked wheels and metal fittings look OK at first glance but only time will tell.Just about everything in wood seems to be a figment of someones imagination.I haven't yet checked the overall measurements for accuracy but the building methodology is all wrong.The only way those wings would look OK is fabric covered,which I would recommend doing as an out of the box build.The fabric would as least cover up a multitude of sins.There just is no excuse for this in 1/10th scale.More on all this later.
Here is my plan.I will use only the parts that I find acceptable or that can be modified to be accurate.I will use this as a starting point like I did with all my other structural type builds.(you gotta start somewhere)
As I mentioned before I am a member of the Canadian Aviation Heritage Center which is only about ten minutes down the road from me and they have a 1:1 scale Bleriot XI now nearing completion.This aircraft will be flown in 2011 to commemorate the 100th anniversary of the first Canadian air show and flight over a Canadian city,Montreal.
Because it is actually to be flown the MOT has forced upon them some more modern modifications for safety sake.It will therefore be my task to find which is original and which has been modified.I want to build the original version. to be cont........

[JohnReid]

Problem solved!

[JohnReid]

[JohnReid]

[JohnReid]

This week was all about making and weathering fencing.It can be a long and repetitive process but you can make it less so by being a little creative and making each section just a little different.
The sections are made to be removable until final assembly .I build each panel as it would be done in full scale and do not use jigs.This way it allows for a build which is more like the real thing,mistakes and all.Posts are installed first ,followed by cross members and then the vertical boards.Weathering is the same method as I used for the barn siding in my other dioramas.I figure that most fences in middle class neighborhoods in those days would be left to age naturally, due to the cost of paint.
In the original picture the fencing looks to be about 4feet internally and the outer perimeter about 6 feet or higher.(My mock shows all the fencing at 4feet.)I decided to go with the picture and use the higher perimeter fencing.The only problem that I can see now would be to make the whole thing look a little walled off from the viewers perspective.If need be the height could be reduced in he future.

[JohnReid]

For those who may be interested I will be following the build of a 1:1 scale military Bleriot being built at the Canadian Aviation Heritage Centre here in Montreal.The fuselage is nearing completion and the wings are now underway.I will be posting 100's of pics of this very accurate build ,over in the Aircraft section of this forum ,while it is still uncovered.
This would make a very unique scratchbuild model project.

[JohnReid]

[JohnReid]