Lozenge decal test it for all

Doug Baumann · 4 July 2009, 08:48 AM

test one swirl

[IMG]

[/IMG]

Doug Baumann · 4 July 2009, 08:52 AM

well we are about done here

but we have to some little stuff to do,, the in side or back side of the print and rib tapes and finish the irregular night hex

Doug

BLOWHARD · 4 July 2009, 08:58 AM

Yes, the holes, and other technical problems. I wasn't aware that these were unfinished in any way save ion colors. What I was referring to were the mismatched "off register" hexes and the parts where some hexes have small bits of other hexes on them etc. Similar things can be seen on your other decals on this page.
I was just wondering if it were intentional.

Doug Baumann · 4 July 2009, 09:10 AM

HI BLOWHARD well i seen and have looked at a lot of hex these last days and noted the Germans painted hex is not perfect nor is the AH there is some over lap and mismatch of the hexes and it looks like there is tracing or a darker line a round the hexes on both German and A-H hexes. so yes some misalignment and that why i need input from all. just because i thank it is there dose not mean it is

Doug

TeamStewart · 4 July 2009, 11:08 AM

Doug:

Great work on all of this. This must be taking a lot of your time and energy.

Can I make a request/suggestion?

We now have 65 pages to go through, and with all the various tests versions and updated versions it can be a little overwhelming to try and find the "definitive" versions of the various patterns.

If I may suggest, could you edit the very first post in the thread, and put a list of all the patterns you have done, with links to the post numbers of your final versions?

This way, you can keep updating the list as you progress through the patterns, and we have a simple reference to go to to get the images we'd like to see and, hopefully, use.

Thanks again or the effort, and the superb results.

Doug Baumann · 4 July 2009, 11:47 AM

Team Sewart

yes i made a post of the finished decals FINISHED LOZENGES from test for all not all are there yet because of little or no input

the idea of a table of contents is great

Doug

TeamStewart · 4 July 2009, 11:54 AM

Quote:

Originally Posted by Doug Baumann

Team Sewart

yes i made a post of the finished decals FINISHED LOZENGES from test for all not all are there yet because of little or no input

the idea of a table of contents is great

Doug

Thanks Doug. I must've missed that thread.

FOKKERJ · 4 July 2009, 01:12 PM

Quote:

Originally Posted by Doug Baumann

i have made the A-H hex or started the A-H hex and ran in to a trouble with the pattern's of O'Connor! it will only repeats horizontally not vertically

if this is so them how did they do the top of the fuselage then, if it will not repeat vertically? i must have missed some thing here ! i have double checked this and it's wrong! i need some HELP!!!!

i will post soon what i have made so far! Doug

Hi Doug,

Great stuff!
I like and respect the work of Dr. Martin O'Conner's Austo-Hungarian Hex.
He put a lot of research into it and I am sceptical of others that have tried to trash his work. Although nothing need be carved into stone, new findings need irrefutabe facts to back up new information before it is accepted as Sacred!

Keep up the good work, I hope that I can be of service to you again.

Best Wishes, Jay

Doug Baumann · 4 July 2009, 02:19 PM

i will make a NEW post with every decal!!

Doug

AROTH · 4 July 2009, 03:03 PM

Gee, Mr. Baumann,

Do I need to get yet another hard drive?